- Speed range: 5 - 59 WPM
- HSCW Mode Support
- Message Memory: 96 letters in four slots with embedded commands
- Keying Modes: Straight key, Iambic A or B
- MCW keying mode
- Farnsworth support
- Autospace mode
- Letterspace reduction
- Adjustable dah/dit ratio
- Paddle swap
- Beacon w/Programmable interval
- Sidetone Output
- Adjustable Sidetone frequency
- High true key output
- Optional Speed Pot
- Push-button user interface
- 24 easy to use commands
- Code practice modes
- 3-7 VDC, built in CPU oscillator
- 5 ma active, 1ľA standby
Copyright 2002-2008 K1EL Systems All Rights Reserved
www.k1el.com
Current K10+ Revision is D
K10 Features
The K10+ is a Morse keyer I.C. with lots of built in features only found in high end keyer I.C.s. With a K10+ you can contruct a "top of the line" keyer for a low price. K10+ is the K9's big brother, most of the K9 features are carried over to the K10+ with lots of new ones. Note that the K9 and K10+ are not pin compatible.
K10 Morse Keyer I.C.
K10+ Documents
K-PCB Boards - $5 USD each
We have had many requests for a small keyer kit that can be embedded in a QRP transceiver or tiny enclosure. In response, we redesigned the original K-PCB kit that we offered years ago. It includes all the basics and will work with either the K10+ or K12 IC. The design includes a speaker driver circuit, low level sidetone output, four message pushbutton interface, on board voltage regulator, and an open collector keying output. We will offer a KPCB kit that includes a PC board, all board mounted parts and a K10+ or K12 for $10.
K10+ I.C. - $6 USD
K-PCB Kit - $10
w/K10+
K-PCB Kit - $10
w/K12
