This chip is designed expressly for dedicated beacon or CW identifier applications. It is very flexible and has the advantage of a very large message storage bank (512 bytes) which is non-volatile. Embedded delays and key down events are supported along with QRSS operation.
The K-ID2 replaces the K-ID part, we changed the design over to a 12F1510 flash based PIC which supports ultra low power operation.
IMPORTANT !! When ordering a KID2 please submit your message list by email to email@example.com. Please use the form below. Orders not following this format will be rejected, thanks for your cooperation. Please allow two weeks for delivery.
Seven triggerable messages stored in non-volatile memory
PTT output: high true TTL
Key output: high true TTL
Sidetone: approx. 800 Hz square wave
Single trigger or repeat message
Timed keydown can be included in messages
Timed pause can be included in messages
Lowfer QRSS speed support (.02, .04, .2, .4 WPM)
Operating voltage 5 VDC < 5ma
No external crystal or oscillator required
512 character total message space
Fixed non QRSS WPM rate
Low power sleep when idle
Fixed message contents specified by purchaser
KID2 - CW Beacon IC
Standard 8 pin PDIP
This is a special order, contact firstname.lastname@example.org for info